BAGGER AUDIO SYSTEMS

 

 

• 2016 Soundz Customz Pricing•

100% plug and play for 11-13 model year CVO Street & Road Glide models, as well as 15-16 Ultra, Street & Road Glide models allow our systems to integrate into the factory system without affecting the warranty of your motorcycle whatsoever.

We are currently working on model & year specific pages to lessen the confusion of these systems.

Please note that each system starts with two front upper fairing speakers & plug and play amplifier, then adds on the speakers you desire to replace from there.  If more amplifier power & channels are desired or needed, the 600 watt amplifier upgrade is required, and listed below. 

What makes a Soundz audio system different from the other guys out there you may be asking??  Click Here!

 

****NOTE TO ALL 2014 and 2015 OWNERS – THE BEST SOUND IS ACHIEVED WITH ANY OF OUR SYSTEMS WHEN YOU HAVE YOUR LOCAL HD TECH FLASH YOUR RADIO TO THE CORRECT SETTING.  OUR EXPERIENCE WITH MOST HD DEALERS IS A COST OF ROUGHLY $40-$90 FOR THIS FLASH.   Soundz now has the ability to flash at events or in our shop in Sioux Falls, SD.

CLICK HERE FOR FLASH INFORMATION

EVERY KIT SOLD FOR A 2014-2016 MODEL WILL BE ADJUSTED FOR THIS SETUP.

All wiring will be setup for the new 14+ models versus the older 98-13 models.  Pricing is the same to avoid confusion between model years, with parts cost exchanged for what is necessary between all model years offered.

2015-16 Road Glide models will require an amplifier mounting bracket that is now included in the kit.

Visit our online store to purchase your kit today!

 

award-es165kx2-630x301

Level V: Pure Perfection!

Step 1 – The front speakers!

This is your MOST IMPORTANT part of the system.

$1600 -CLICK TO BUY!

14-16 model grilles are $100 extra for tweeter mounting.

Complete plug & play kit for stock Harley Touring – Focal ES165KX2 with Special Edition Soundz Customz crossover network specifically built for optimum sound on a motorcycle & 250 Watt 2 channel Amp with wire harness & speaker adapters & oscilloscope tuned.

Step 2 – The front lower fairing speakers!

This is your next best add-on for highway speed sound.  Don’t have the lower fairings?  We sell them complete (w/o speaker pods) as well for an additional $500.

$1000 – With 165KRC – FOR LOWER FAIRING SPEAKER ADD-ON W/HARNESS, GRILLES & LVF PODS FOR HD VENTED LOWERS. *Additional amp required.

Step 3 – The rear tour pack pod speakers.

These speakers will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$1000 – For rear tour pack pod speaker wiring harness, grilles, spacers, and Focal 165KRC speaker kit.   *Additional amp required.

$200 – For rear tour pack pod for deeper mounting depth speakers in Levels 1-4.

Step 4 – The speaker lid kits.

This is a great way to finish off the sound of your bagger audio system for when you want to show off!  These kits will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$180  – For HD CVO style 5×7″ lids.  Welcome the new Focal Performance R570C!  Great performance at a reasonable price! *Additional amp required.

$350  –  CLICK TO BUY! For HD CVO style 5×7″ lids.  Choose between the new Focal Performance 570AC or the Hybrid Audio Imagine I57-2 as a direct drop in replacement for the HD bolt pattern. *Additional amp required.

$500  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$800  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$700  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$1100  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

 

Amp upgrades and add-ons:

$250  –  600 watt 4 channel amplifier upgrade to basic 2-channel kit.  The easiest drop in 600 watt 4 channel amp for all HD fairings!

$500  – For additional 2ch 100 watt x2 amplifier & wiring kit.  Required for addition of third and/or fourth pair of speakers when four speakers are already installed.

 

Make sure to check out the video below from one of our customers!  Only four speakers and 600 watts, and this bike ROCKS!

 

This is a great example of what just TWO speakers can do on a street glide!

 

ec165k_visuel-0_1920x670

Level IV: Loud, Clean, and Clear!

Fits 1998 – 2016 Models!

– Our most popular kit 6 years in a row!

Step 1 – The front speakers!

This is your MOST IMPORTANT part of the system.

$1100– CLICK TO BUY!
Complete plug & play kit for stock Harley Touring – Focal – Soundz Customz EC165K & 250 watt 2 channel  Amp with wire harness & speaker adapters & oscilloscope tuned.

 

Step 2 – The front lower fairing speakers!

This is your next best add-on for highway speed sound.  Don’t have the lower fairings?  We sell them complete (w/o speaker pods) as well for an additional $500.

$1000 – For lower vented fairing speaker add on with harness, grilles & speaker pods with 165KRC.

 

Step 3 – The rear tour pack pod speakers.

These speakers will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$1000 – For rear tour pack pod speaker wiring harness, grilles, spacers, and Focal 165KRC speaker kit.   *Additional amp required.

$200 – For rear tour pack pod for deeper mounting depth speakers in Levels 1-4.

Step 4 – The speaker lid kits.

This is a great way to finish off the sound of your bagger audio system for when you want to show off!  These kits will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$180  – For HD CVO style 5×7″ lids.  Welcome the new Focal Performance R570C!  Great performance at a reasonable price! *Additional amp required.

$350  – For HD CVO style 5×7″ lids.  Choose between the new Focal Performance 570AC or the Hybrid Audio Imagine I57-2 as a direct drop in replacement for the HD bolt pattern. *Additional amp required.

$500  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$800  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$700  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$1100  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

 

Amp upgrades and add-ons:

$250  –  600 watt 4 channel amplifier upgrade to basic 2-channel kit.  The easiest drop in 600 watt 4 channel amp for all HD fairings!

$500  – For additional 2ch 100 watt x2 amplifier & wiring kit.  Required for addition of third and/or fourth pair of speakers when four speakers are already installed.

 

pc165f

 

Level III: Competition Destroyed!

Fits 1998 – 2016 Models!

Step 1 – The front speakers!

This is your MOST IMPORTANT part of the system.

$900
Complete plug & play kit for stock Harley Touring – Focal Performance PC165F  & 250 watt 2 channel Amp with wire harness & speaker adapters & Oscilloscope tuned.

Step 2 – The front lower fairing speakers!

This is your next best add-on for highway speed sound.  Don’t have the lower fairings?  We sell them complete (w/o speaker pods) as well for an additional $500.

$650 – For lower vented fairing speaker add on with harness, grilles & speaker pods with PC165F.

Step 3 – The rear tour pack pod speakers.

These speakers will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$650 – For rear tour pack pod speaker wiring harness, grilles, spacers, and Focal PC165F speaker kit.   *Additional amp required.

$200 – For rear tour pack pod for deeper mounting depth speakers in Levels 1-4.

Step 4 – The speaker lid kits.

This is a great way to finish off the sound of your bagger audio system for when you want to show off!  These kits will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$180  – For HD CVO style 5×7″ lids.  Welcome the new Focal Performance R570C!  Great performance at a reasonable price! *Additional amp required.

$350  – For HD CVO style 5×7″ lids.  Choose between the new Focal Performance 570AC or the Hybrid Audio Imagine I57-2 as a direct drop in replacement for the HD bolt pattern. *Additional amp required.

$500  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$800  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$700  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$1100  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

Amp upgrades and add-ons:

$250  –  600 watt 4 channel amplifier upgrade to basic 2-channel kit.  The easiest drop in 600 watt 4 channel amp for all HD fairings!

$500  – For additional 2ch 100 watt x2 amplifier & wiring kit.  Required for addition of third and/or fourth pair of speakers when four speakers are already installed.

 

 

Focal 165AC

 

Level II: Best bang for your buck!

Fits 1998 – 2016 Models!

Step 1 – The front speakers!

This is your MOST IMPORTANT part of the system.

$700– CLICK TO BUY!
Complete plug & play kit for stock Harley Touring – Focal Performance 165AC  & 250 watt 2 channel Amp with wire harness & speaker adapters & Oscilloscope tuned.

 

Step 2 – The front lower fairing speakers!

This is your next best add-on for highway speed sound.  Don’t have the lower fairings?  We sell them complete (w/o speaker pods) as well for an additional $500.

$450 – For lower vented fairing speaker add on with harness, grilles & speaker pods with 165AC.

 

Step 3 – The rear tour pack pod speakers.

These speakers will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$450 – For rear tour pack pod speaker wiring harness, grilles, spacers, and Focal 165AC speaker kit.   *Additional amp required.

$200 – For rear tour pack pod for deeper mounting depth speakers in Levels 1-4.

Step 4 – The speaker lid kits.

This is a great way to finish off the sound of your bagger audio system for when you want to show off!  These kits will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$180  – For HD CVO style 5×7″ lids.  Welcome the new Focal Performance R570C!  Great performance at a reasonable price! *Additional amp required.

$350  – For HD CVO style 5×7″ lids.  Choose between the new Focal Performance 570AC or the Hybrid Audio Imagine I57-2 as a direct drop in replacement for the HD bolt pattern. *Additional amp required.

$500  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$800  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$700  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$1100  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

 

Amp upgrades and add-ons:

$250  –  600 watt 4 channel amplifier upgrade to basic 2-channel kit.  The easiest drop in 600 watt 4 channel amp for all HD fairings!

$500  – For additional 2ch 100 watt x2 amplifier & wiring kit.  Required for addition of third and/or fourth pair of speakers when four speakers are already installed.

 

Focal ISC165

 

Level I: Entry level never sounded so good!

Fits 1998 – 2016 Models!

Step 1 – The front speakers!

This is your MOST IMPORTANT part of the system.

$600– CLICK TO BUY!
Complete plug & play kit for stock Harley Touring – Focal ISC165 & 250 watt 2 channel Amp with wire harness & speaker adapters & oscilloscope tuned.

 

Step 2 – The front lower fairing speakers!

This is your next best add-on for highway speed sound.  Don’t have the lower fairings?  We sell them complete (w/o speaker pods) as well for an additional $500.

$350  – For lower vented fairing speaker add on with harness, grilles & speaker pods with ISC165.

 

Step 3 – The rear tour pack pod speakers.

These speakers will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$350 – For rear tour pack pod speaker wiring harness, grilles, and Focal ISC165 speaker kit.  Flush mount option for best appearance in the tour pack pods!

$200 – For rear tour pack pod for deeper mounting depth speakers in Levels 1-4.

Step 4 – The speaker lid kits.

This is a great way to finish off the sound of your bagger audio system for when you want to show off!  These kits will require a 4-channel amp or an amplifier add-on depending upon system configuration.

$180  – For HD CVO style 5×7″ lids.  Welcome the new Focal Performance R570C!  Great performance at a reasonable price! *Additional amp required.

$350  – For HD CVO style 5×7″ lids.  Choose between the new Focal Performance 570AC or the Hybrid Audio Imagine I57-2 as a direct drop in replacement for the HD bolt pattern. *Additional amp required.

$500  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$800  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance R690C 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$700  – For single 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

$1100  – For double 6×9″ speaker lids, wiring, seals, (stock tethers are reused) and Performance 690AC 6×9″ speakers. *Additional amp required. Fits 98-13 models only

 

Amp upgrades and add-ons:

$250  –  600 watt 4 channel amplifier upgrade to basic 2-channel kit.  The easiest drop in 600 watt 4 channel amp for all HD fairings!

$500  – For additional 2ch 100 watt x2 amplifier & wiring kit.  Required for addition of third and/or fourth pair of speakers when four speakers are already installed.

Looking for the radio to compliment our amps and speakers?  CLICK HERE to check them out!

****4-channel signal upgrades vary in cost depending upon the extent of harness plugs required.  Please consult a Soundz sales representative to determine exactly what your motorcycle requires.

 

KIT PRICES ARE CONSIDERED A “BUNDLE” AND WILL NOT BE SEPARATED AT THE PRICE POINTS THEY ARE AT.  NO RETURNS OR REFUNDS ON INDIVIDUAL PARTS OF A BUNDLE WILL BE ACCEPTED.  INDIVIDUAL PARTS ARE SOLD AT THEIR RESPECTIVE INDIVIDUAL RETAIL PRICE WITH THE MINIMUM MANUFACTURE WARRANTY – NO DISCOUNTS WILL APPLY.

2016 SCHEDULE OF EVENTS  – CLICK HERE! Attending one of these events and want to schedule an appointment?  Email sales@soundzinstall.com or call 605-274-3535 or 605-376-3252!

 

Dealer Inquiries Welcome!

All prices listed are for standard installation only. Some vehicle may require additional parts and/or labor that is not listed. Please consult with your Soundz sales representative to verify what your vehicle needs and obtain a current price list.  Prices, models, and features subject to change without notice. Not responsible for errors in print.

 

Report any bugs to:  sales@soundzinstall.com

©2015 Soundz Customz. All Rights Reserved.

Soundz, INC. is not in any way affiliated with the other brands represented here. All copyrighted images and content belong to the original copyright holder and have been used here with proper permission. Any other use of this copyrighted material is not permitted without prior approval from the original copyright owners.

 

 

ASSUMPTION OF LIABILITY

Soundz, INC.  dba Soundz Customz and its partners assume no responsibility for the misuse of any product that we manufacture or represent.  You and only you can determine the suitability of any product that you choose. By purchasing any products offered by Soundz, Inc. you assume all risks and liabilities involved with your choice of modifying your motorcycle and agree to hold harmless Soundz, Inc., partners, and it’s employees, officers or affiliates from any injury or incidents that may occur to you, your passengers, your vehicle or anyone that may be involved with any situation that may arise as a result of modifying your motorcycle.